Fitting Doors and Windows in a Flat: Prices and Stages

We fit the metal entrance door, interior doors and metal-plastic windows. Fitting an interior door costs 80-250 GEL per door.

The metal entrance door and all outer windows must go in before the floor screed is poured.

Interior doors go in at the final phase of the renovation, at stage 7. We fit them alongside the wall painting and the floor covering.

What does fitting doors and windows in a flat cost?

The price of fitting doors and windows in a flat depends on the type of work; fitting an interior door costs 80-250 GEL per door.

Fitting a metal entrance door costs 80-300 GEL per door. Fitting a window, labour only, costs about 100-200 GEL per window.

The total depends on the scope of work. Some prices cover labour only, others labour and materials together.

Door material is priced separately; to choose materials, see renovation materials.

WorkPrice
Fitting an interior door 80 to 250 GEL per 1 door
Fitting a metal entrance door 80 to 300 GEL per 1 door
Metal-plastic window, supplied and fitted about 160 to 550 GEL per 1 m² of window
Fitting a window, labour only about 100 to 200 GEL per 1 window
Removing an old window 10 to 45 GEL per 1 m²

At which renovation stage are doors and windows fitted?

In a renovation, the metal entrance door and all windows go in before the floor screed, and interior doors go in at the end of the work.

The entrance door and all windows must be fitted before the floor screed is poured. By then the plumbing and heating pipes must be in too.

The floor screed is poured only after the walls are plastered, never before. The heating pipes are pressure-tested for leaks before the screed goes down.

The sizes of new door openings are set in advance, when partition walls go up in block or plasterboard (drywall). The final choice of interior doors should be made before the walls are plastered.

Interior doors go in at stage 7, while the wall painting and floor covering are under way. The full order of every step is on renovation stages.

What does a metal-plastic window and its fitting cost?

A metal-plastic window, supplied and fitted, costs about 160-550 GEL per m² of window.

This price range covers different designs, from a fixed pane to an opening sash. The profile quality, the glazing unit and the fittings also affect the price.

If you have already bought the windows, fitting alone costs about 100-200 GEL per window. Removing an old window costs 10-45 GEL per m².

Does replacing doors and windows or cutting an opening need a permit?

Fitting or removing a door, a window or another opening is on the I-class list of works (item “ქ”). I-class work needs a simple notice, decided within 5 working days; in a class III or IV block, the Architecture Service sets the procedure.

Under Government Resolution No. 255, cutting a doorway in a partition is repair and needs no building permit. When joining a balcony to a room, removing the door-and-window block is I-class work, but removing a load-bearing wall is reconstruction.

Repairing a building’s facade without substantially changing its size or appearance usually counts as ordinary repair, but this rule does not apply to immovable cultural heritage monuments. In each specific case, the Architecture Service decides.

More on permits is on wall removal permit. This is general information, not legal advice.

How do you check fitted doors and windows?

When checking fitted doors and windows, look at how the sashes move, the seals, and the places where they meet the floor.

For the check, bring a tape measure, a spirit level and an ordinary sheet of paper. Close the window on the sheet in the frame: if it stays held tight, the rubber seal works well.

The full list for accepting the work is on our stage acceptance checklist.

What does our warranty cover on door fitting?

Our warranty covers the doors and fittings we fitted, if the damage is caused by the quality of the fitting.

Even if you bought the doors and locks yourself, we take responsibility for the fitting we did. A factory defect in the door or lock itself is covered by the maker’s warranty. In month 12 we make a free check visit, which includes adjusting the doors.

During the check visit, we look at sealant gaps and at how the doors work. More detail is on warranty and payment terms.

How do you get a free preliminary estimate for your flat?

To get a free preliminary written estimate for your flat, send us the number of doors and windows, their sizes, the building type and photos.

Managing from abroad? Write in English for a free written preliminary estimate in 2 working days by email, WhatsApp, or Viber. How we run a job for owners abroad is on renovation for owners abroad.

Request an estimate

Based on your floor area, building type, and photos, you get a free reply by email, WhatsApp, or Viber within 2 working days, with no obligation. Before the contract we see the flat, in person or on a video call, and fix the price.

Our schedule is booked until January 2027, so new renovations start from January. You still get your estimate now, and we agree the date to see the flat now.