Old Apartment Renovation in Tbilisi: Capital Renovation and Cost

Before the contract we see the flat, in person or on a video call, and fix the price. A full renovation runs in nine stages.

Renovation level
500-1,100GEL per m²
1,000-2,000+GEL per m²
Area (m²)
Your estimate18,500 to 41,000 ₾

A full renovation of a 37 m² apartment with works and materials costs about 18,500 to 41,000 GEL (2026).

Labour and materials. Not included: furniture, appliances, debris removal (about 150-300 GEL a truckload) and cleaning after the works (about 15 GEL per m²). Keep about 10-15% of the budget aside for the unexpected; we start any extra work only after your written yes.

What is and isn't in the price
Request our estimate

An old flat almost always needs a capital renovation: new wiring, pipes and floors, not only new finishes.

An old flat has no separate rate. A full renovation of a flat with works and materials costs 500-1,100 GEL per m² at a standard level. A premium renovation costs about 1,000-2,000 GEL per m² and more.

How much does it cost to renovate an old flat?

An old flat has no separate rate: a full renovation of a flat in Tbilisi costs 500-1,100 GEL per m² at a standard level, and about 1,000-2,000 GEL and more at a premium level, works and materials included.

The final price depends on the floor area, how worn the systems are and the materials you choose. The table below gives full renovation budgets for common flat sizes.

Level1 m²40 m²50 m²60 m²80 m²
Standard level 500 to 1,100 GEL 20,000-44,000 GEL25,000-55,000 GEL30,000-66,000 GEL40,000-88,000 GEL
Premium level about 1,000 to 2,000 GEL and more 40,000-80,000 GEL and more50,000-100,000 GEL and more60,000-120,000 GEL and more80,000-160,000 GEL and more

At the National Bank of Georgia rate of 2.5973 GEL per US dollar (3 November 2026), the 40 m² standard range is about $7,700 to $16,900.

The more your flat needs stripped out and replaced, the higher the total. Furniture and appliances are not included.

What does a capital renovation replace in an old flat?

A capital renovation of an old flat replaces every worn-out system, the floor base, old partitions and the finish layers, stripping the flat to the bare shell.

That is why the work starts with a full strip-out.

Strip-out to the bare shell

Wallpaper, old tiles, old wiring, circuit breakers, pipes and plumbing fixtures come out. The rooms are stripped to the main structure (black frame), so the new systems and straight walls start on a clean base.

Wiring

Soviet blocks have old aluminium wiring with no protective earthing. Wiring in older houses cannot carry the load of modern appliances.

A full renovation lays new copper wiring and fits a new distribution board and new circuit breakers. Electrical labour costs 15-40 GEL per point, about 1,000-3,500 GEL for an 80 m² flat.

Water pipes

Old galvanised steel water pipes are coated with scale inside and are often rusted. A capital renovation replaces the whole water supply with modern pipes. Running pipes and connecting a fixture costs 80-110 GEL per plumbing point.

Sewer risers

Cast-iron sewer risers are often in poor shape and are replaced in a full renovation.

Gas

Moving a gas meter or a building gas riser needs an official application to Tbilisi Energy. Tbilisi Energy checks the flat’s gas pipework and disconnects appliances that do not meet its requirements.

Connecting an appliance to the gas network on your own counts as illegal use, so any gas change has to follow the rules strictly.

Floors and new screed

A full renovation includes pouring new floor screed, which costs 10-20 GEL per 1 m² for labour.

Plaster, putty and painting

Walls are levelled by hand plastering or with plasterboard (drywall). The plastered surface gets putty, then painting. In wet areas, tiles go on the walls and floor.

Our full renovation runs in nine stages, set out on the stages list.

What do demolition and system replacements cost separately?

Demolition and system costs in an old flat depend on the debris volume, the area stripped and the number of electrical and plumbing points.

The unit rates below let you check each line of an estimate.

These rates exclude materials; the strip-out and debris rows include carry-down and transport.

WorkPrice
Full strip-out of an old flat to black frame, with carry-down and removal about 130 to 300 GEL per 1 m² of floor
Demolishing a non-load-bearing brick or block partition 10 to 35 GEL per 1 m² of wall
Removing old tiles, including debris removal 5 to 25 GEL per 1 m²
Removing old floor screed 10 to 35 GEL per 1 m²
Hauling away construction debris about 150 to 300 GEL per trip
Electrical point (running cable, fitting a socket or switch) 15 to 40 GEL per 1 point
Electrical labour for an 80 m² flat about 1,000 to 3,500 GEL
Wet point / plumbing point (running pipes and connecting a fixture) 80 to 110 GEL per 1 point

Which kind of old building is your flat in?

Your building type changes what the renovation has to deal with, and each type has its own guide.

A new build starts from the frame state the developer hands over instead: see white, black and green frame.

Why are the walls damp in an old flat, and how do you fix them?

Damp walls in an old flat usually come from poor ventilation, condensation or water getting into the structure.

Common causes are condensation on cold walls, leaking pipes, a damaged roof or facade, cracks, cold spots in the walls, and on the ground floor, moisture rising from the ground.

Condensation shows on windows, in the corners of outside walls and in badly aired rooms. A leak shows as a distinct stain in one place that grows over time.

A stain that gets worse after rain points to the roof, facade, balcony or outside wall. A damp ceiling on a top floor can come from the roof, and in a block of flats from the neighbour’s plumbing above.

The right order is: find the cause, stop the water, let the wall dry, restore the damaged layer, then finish. Wiping off mould and painting over it does not last, because new paint on a wall that keeps getting wet soon bubbles and peels.

When the water comes from outside your flat (the roof, the facade or a neighbour’s pipes), it has to be fixed at the source first. Our warranty does not cover damage from water coming from neighbours or the building’s shared risers.

To prevent damp, fit extract fans in the bathroom and kitchen, and avoid drying laundry indoors. Anti-mould and moisture-resistant paints exist for walls that are at risk. Walls must dry well before any new finish goes on: when a quick renovation covers walls that have not dried, mould can appear on the surface.

What should you check when viewing an old flat?

When viewing an old flat, check the systems you cannot see before you price the finishes.

How much reserve should you keep?

Keep about 10-15% of your budget aside for the unexpected, which is about 4,000-14,000 GEL on an 80 m² standard renovation.

We start any extra work only after your written yes.

How do you get a free preliminary written estimate for an old flat?

You get a free preliminary written estimate by sending your flat’s facts and photos.

Send the floor area, the building type and photos of each room, the electrical panel and the bathroom. You get the estimate by email, WhatsApp or Viber.

Managing from abroad? Write in English for a free written preliminary estimate in 2 working days by email, WhatsApp, or Viber. How we run a job for owners abroad is on renovation for owners abroad.

Request an estimate

Based on your floor area, building type, and photos, you get a free reply by email, WhatsApp, or Viber within 2 working days, with no obligation. Before the contract we see the flat, in person or on a video call, and fix the price.

Our schedule is booked until January 2027, so new renovations start from January. You still get your estimate now, and we agree the date to see the flat now.