Flat Heating in Tbilisi: Gas Boiler, Radiators and Fitting Prices

In Tbilisi flats, “central heating” means the flat’s own gas boiler with radiators. A radiator system with its own gas boiler is one of the most widespread solutions in Georgia. We do this work at the building-services stage of a flat renovation.

The heating pipes are laid in the floor before the screed is poured. So the exact positions of the radiators and the boiler should be set with the interior plan before the floor and walls are closed.

Heating labour for a 60 m² flat costs about 1,000-1,500 GEL. That figure is an estimate built on the assumption of 6 pipe points, 6 radiators and 1 boiler.

What does installing heating in a flat cost?

Heating installation labour for a 60 m² flat costs about 1,000-1,500 GEL (assuming 6 pipe points, 6 radiators and 1 boiler).

Running a heating pipe costs 50-80 GEL per point for labour. As a rule, the count is about 1 point for every 10 m² of floor.

At the National Bank of Georgia rate of 2.5973 GEL per US dollar (3 November 2026), that is about $400 to $600 for the 60 m² labour.

Pipes and fittings are priced separately.

Work or materialPrice
Heating pipe point, labour 50 to 80 GEL per 1 point (about 1 point for every 10 m²)
Radiator fitting, labour about 100 GEL per 1 radiator
Boiler fitting, labour 150 to 250 GEL
Wall-hung double-circuit gas boiler (24-28 kW), material 1,400 to 3,800 GEL
Aluminium sectional radiator, material 15 to 70 GEL per 1 section
Underfloor heating, labour 30 to 70 GEL per 1 m²
Heating labour for a 60 m² flat (6 pipe points, 6 radiators, 1 boiler) about 1,000 to 1,500 GEL (an estimate)

What does a flat’s heating system consist of?

A flat’s heating system consists of a gas boiler, a manifold and its cabinet, the pipe network and the radiators.

A small flat needs the heating unit with its boiler, manifold and cabinet just as much as a large one does. So at the same finish level, heating a small flat usually costs more per m² than heating a large one.

Manifold heating means a separate pair of pipes runs from the manifold to each radiator. In flats, metal-plastic and polypropylene pipes are used most often.

At which renovation stage is heating done in a flat?

The heating pipes in a flat are laid before the floor screed.

The choice between radiators and underfloor heating must be made before the floor is poured. See how underfloor heating is installed and how the other renovation stages are planned.

Underfloor heating raises the floor level. Its labour costs 30-70 GEL per m², while the screed, pipes, insulation and manifold are priced separately.

How do you choose a gas boiler, and what does gas safety require?

Tbilisi Energy names open-chamber appliances in living spaces as the most serious problem it finds, so for a flat we recommend a boiler with a closed combustion chamber.

A double-circuit boiler gives hot water as well as heating. Before buying, check whether the flue system is included in the price.

Tbilisi Energy has said that the most serious problem is open-chamber appliances installed in living spaces. In its words, this often ends fatally.

Before a new or repaired gas appliance is put into use, its connection must be technically checked through the gas distribution company. This requirement is set by article 6 of the energy regulator’s (GNERC) rules.

How many radiator sections does a room need?

The number of aluminium radiator sections is calculated for each room separately, by its area and heat loss.

According to makers’ data, one aluminium section heats about 1.4-2 m².

An aluminium sectional radiator costs 15-70 GEL per section for the material, and fitting a radiator costs about 100 GEL for labour.

What state is the heating in a white or green frame?

In a green frame (walls plastered, floor screeded and services laid), the heating pipes are usually already laid, but the boiler and radiators often still need buying and fitting.

A white frame (plastered walls and usually a screeded floor; power, water and gas brought in, internal wiring and pipes usually not yet done) usually comes without heating pipes. In such a flat the heating pipes start from scratch, and the labour costs 50-80 GEL per point.

If your flat was handed over as a green frame, boiler fitting costs 150-250 GEL for labour and each radiator about 100 GEL to fit.

How do you check the heating system before the screed is poured?

The heating system must be tested at working pressure before the floor screed and before the walls are closed, to rule out a hidden leak.

To coordinate plumbing and heating correctly, see plumbing.

How do you get a preliminary estimate for heating?

To get a preliminary estimate for heating, send us the floor area, the number of rooms, the building type, photos and whether the pipes are already laid.

Managing from abroad? Write in English for a free written preliminary estimate in 2 working days by email, WhatsApp, or Viber. How we run a job for owners abroad is on renovation for owners abroad.

Request an estimate

Based on your floor area, building type, and photos, you get a free reply by email, WhatsApp, or Viber within 2 working days, with no obligation. Before the contract we see the flat, in person or on a video call, and fix the price.

Our schedule is booked until January 2027, so new renovations start from January. You still get your estimate now, and we agree the date to see the flat now.